220V H Type Wind Turbin Generator 10kw Vertical Wind Turbine

• Customization: Available
• After-sales Service: Yes
• Warranty: 5years
• Model NO.: RX-H Series-10K
• Output Type: AC Three Phase
• Number of Blade: Multiple-Blade
• Rotating Shaft: Vertical
• Stress Way of Blade: Resistance
• Power: 10-100kW
• Phase: Three Phase
• Certification: CE, RoHS
• Start up Speed: 2m/S
• Rated Speed: 12m/S
• Security Wind Speed: 35m/S
• Top Quality Except Tower: 1.5ton
• Blade Diameter: 5.0m
• Rated Rpm: 60r/Min
• Generator: Three Phase Permanent Magnet Generator
• Rotor Blade Material: Reinforced Glass Fiber
• Transport Package: Wood Box
• Specification: 503*500*393CM
• Trademark: R&X
• Origin: China
• HS Code: 8502310000
• Production Capacity: 50000/Year
• Package Size: 503.00cm * 500.00cm * 393.00cm
• Package Gross Weight: 15000.000kg

Product Description

Product Parameters

Model	10KW
Rated power	10KW
Max power	12KW
Rated voltage	120V/220V/380V
Start up wind speed	2m/s
Rated speed	12m/s
Rated rpm	300
Security wind speed	35m/s
Top quality except tower	0kg
Blade diameter	3.15M
Blade high	5.0M
Swept area	4.0mm²
Blades number	5
Rated RPM	60r/min
Rotor blade material	Reinforced glass fiber
Generator	Three phase permanent magnet generator
Working temperature	-40ºC-80ºC

 

Drawing

Detailed Photos

Feature

1, Low rpm, high efficiency, small size, beautiful appearance, small shake

2,It adopts humanization design, easy to install, mantain, examine and repair.

3,The blades material is made of enhanced glass fiber reinforced plastics. Better configuration design Improve the utilization rate of wind energy,
Increase annual electricity output.

4, Permanent magnet rotor alternator with special design of rotor, reduce the resistance of generator. It makes wind wheel and generator has better
fit, work more smoothly

Our Factory

FAQ

1. What kind of region can be installed wind turbine?
Small wind turbines should be applied in the regions which wind resources is sufficient. The annual average wind speed should be
more than 3m/s, the effective wind speed 3-20m/s should be more than 3000h in accumulation per year. The density of 3-20m/s
effectively average wind power should be more than 100W/m2.

It should be noted that choosing the rated design speed wind turbine is in conformity with local design speed. It is significantly
in making use of wind resources and in economic aspect. Wind tunnel test proves that the fan power transformation of the impeller
in the direct ratio with wind speed, that is to say, the wind speed decide the output electrical power.

2. How to calculate the actual need power in my home to configure the appropriate power of wind turbines?
At present, battery stores the power from the wind turbine, then discharge to home appliances. So the power which discharged to
the load and be charged timely by wind turbine is the amount of the actual needs power.

Take an example: the rated output power from wind turbine generator is 100W per hour, the continuous workable hours by wind is 4
hours. The battery can be charged total capacity is 400WH. For only about 70% power from battery can be discharged to the load, so
the actual power which can be used from battery is 280WH.

If there are:

1) Bulb15W x 2 Pieces, working 4 hours one day, consumption 120WH

2) TV 35W x 1 set, working 3 hours one day, consumption 105WH

3) Radio 15W x 1 Piece, working 4 hours one day, consumption 60WH

Above total consumption is 285WH per day. If you
only design to install 100W wind turbine generator, the consumption total power
will more than the power from wind turbine generator. In long period of time using power from 100W wind turbine generator, it will
make the battery serious loss of electricity and damaged, and it will cut down your battery service life.

It is assumed that wind turbine at rated wind power generation and energy consumption, but in fact, due to the variability of the
wind, intermittent, there are strong and weak wind different (wind speed) and wind blow in long time and short time
different(frequency). So you should cut down even cut off some electrical application working time when the wind condition is in
poor to protect your battery. If your budget is enough, it will be better to install a diesel generator set or install solar
panels at the same time.

3. How to select the correct battery capacity to get power from wind turbine generator?
Generally, the battery capacity should be equal or smaller than the power from wind turbine generator.

1) 100W wind turbine generator matches 120AH battery (60AH x 2 Pieces)

2) 200W wind turbine generator matches 120-180AH battery (60 OR 90AH x 2 Pieces)

3) 300W wind turbine generator matches 240AH battery (120AH x 2 Pieces)

4) 750W wind turbine generator matches 240AH battery (120AH x 2 Pieces)

5) 1000W wind turbine generator matches 360AH battery (60AH x 3 Pieces)