Inner Outer Rotor 1kw Low Rpm Permanent Magnet Generator

• Customization: Available
• After-sales Service: Yes
• Warranty: 10years
• Model NO.: RX-PMG550-1000
• Output Type: AC Three Phase
• Rotating Shaft: Vertical
• Power: ＜10kW
• Certification: CE, RoHS
• Rated Power: 1kw
• Output Voltage: 48V
• Generator Type: Permanent Magnet Generator
• Used for: Motor/Wind/Water Genreator
• Weight: 109kg
• Rated Speed: 80rpm
• Structure: Inner/Outer Rotor
• Rated Current: 20A
• Shaft. Diameter: 78mm
• Insulation Resistance: 100mohm Min(500V DC)
• Housing Material: Aluminum ( Alloy )
• Shaft Material: Steel
• Efficiency: >95%
• Leakage Level: <5 Ma
• Transport Package: by Wooden Box
• Specification: 60*60*48cm
• Trademark: RX
• Origin: China
• HS Code: 8502310000
• Production Capacity: 50000 Pieces/ Year
• Package Size: 60.00cm * 60.00cm * 48.00cm
• Package Gross Weight: 109.000kg

Product Description

Disc Coreless Permanent Magnet Generator

 

Product Description

Our disc coreless PMG have advantage in low Rated speed, Low starting wind speed, Small volume, Energy Small, Light weight,
Compact structure, High efficiency etc.

1. Coreless, anhysteresis, slotless, have low starting torque.

2. No iron loss, have high efficiency

3. Adopt unique coreless precision winding technology design precision coil

4. Adopt the rare earth permanent magnet, which is multiple, mean gap, high power density and high output power.

5. Low speed direct driving, no torque fluctuations

6. Compact structure, high ratio of power to volume

7. No iron loss, low calorific value, small temperature rise

8. Simple structure, easy to install

9. The brushless structure, free maintenance

10. Application for vertical axis wind turbine, gasoline generators, hydroelectric generator
 

Product Parameters

NO.	PARAMETER	UNITS	DATA
1	Rated power	KW	1
2	Rated speed	RPM	80
3	Rated voltage	V	48
4	Rated Current	Amp	20
5	Rated Torque	NM	158.3
6	Efficiency		>95%
7	Resistance (Line-Line)		-
8	Winding type		Y
9	Insulation Resistance		100Mohm Min(500V DC)
10	Leakage level		<5 ma
11	Start torque	N/M	<0.5
12	Phase		Three phase
13	Structure		Inner rotor
14	Stator		coreless
15	Rotor		Permanent magnet type (inner rotor)
16	Gen. Diameter	mm	556
17	Gen. Length	mm	330
18	Gen. Weight	kg	65
19	Shaft. Diameter	mm	78
20	Housing Material		Aluminum ( Alloy )
21	Shaft Material		Steel

 

Detailed Photos

 

Company Profile

FAQ

1. What kind of region can be installed wind turbine?
Small wind turbines should be applied in the regions which wind resources is sufficient. The annual average wind speed should be
more than 3m/s, the effective wind speed 3-20m/s should be more than 3000h in accumulation per year. The density of 3-20m/s
effectively average wind power should be more than 100W/m2.

It should be noted that choosing the rated design speed wind turbine is in conformity with local design speed. It is significantly
in making use of wind resources and in economic aspect. Wind tunnel test proves that the fan power transformation of the impeller
in the direct ratio with wind speed, that is to say, the wind speed decide the output electrical power.

2. How to calculate the actual need power in my home to configure the appropriate power of wind turbines?
At present, battery stores the power from the wind turbine, then discharge to home appliances. So the power which discharged to
the load and be charged timely by wind turbine is the amount of the actual needs power.

Take an example: the rated output power from wind turbine generator is 100W per hour, the continuous workable hours by wind is 4
hours. The battery can be charged total capacity is 400WH. For only about 70% power from battery can be discharged to the load, so
the actual power which can be used from battery is 280WH.

If there are:

1) Bulb15W x 2 Pieces, working 4 hours one day, consumption 120WH

2) TV 35W x 1 set, working 3 hours one day, consumption 105WH

3) Radio 15W x 1 Piece, working 4 hours one day, consumption 60WH

Above total consumption is 285WH per day. If you only design to install 100W wind turbine generator, the consumption total power
will more than the power from wind turbine generator. In long period of time using power from 100W wind turbine generator, it will
make the battery serious loss of electricity and damaged, and it will cut down your battery service life.

It is assumed that wind turbine at rated wind power generation and energy consumption, but in fact, due to the variability of the
wind, intermittent, there are strong and weak wind different (wind speed) and wind blow in long time and short time
different(frequency). So you should cut down even cut off some electrical application working time when the wind condition is in
poor to protect your battery. If your budget is enough, it will be better to install a diesel generator set or install solar
panels at the same time.

3. How to select the correct battery capacity to get power from wind turbine generator?
Generally, the battery capacity should be equal or smaller than the power from wind turbine generator.

1) 100W wind turbine generator matches 120AH battery (60AH x 2 Pieces)

2) 200W wind turbine generator matches 120-180AH battery (60 OR 90AH x 2 Pieces)

3) 300W wind turbine generator matches 240AH battery (120AH x 2 Pieces)

4) 750W wind turbine generator matches 240AH battery (120AH x 2 Pieces)

5) 1000W wind turbine generator matches 360AH battery (60AH x 3 Pieces)